How To Install A Wall Mounted Air Conditioner

Wall-mounted air conditioners are a great way to cool your home or office space without taking up valuable floor space. They are also relatively easy to install, making them a great option for DIYers. If you are thinking about installing a wall-mounted air conditioner, follow these steps to ensure a successful installation.

1. Choose the right location

The first step is to choose the right location for your air conditioner. The unit should be installed on a wall that is at least 6 feet tall and 3 feet wide. The wall should also be able to support the weight of the unit, which can be up to 100 pounds. Once you have chosen a location, mark the spot where you will be drilling the holes for the mounting bracket.

2. Install the mounting bracket

The next step is to install the mounting bracket. The bracket will come with a template that you can use to mark the holes for the screws. Once you have marked the holes, drill them into the wall. Then, insert the screws into the holes and tighten them until the bracket is securely fastened to the wall.

3. Hang the air conditioner

Once the mounting bracket is installed, you can hang the air conditioner. To do this, simply lift the air conditioner onto the bracket and slide it into place. Make sure that the air conditioner is level before tightening the screws that hold it in place.

4. Connect the refrigerant lines

The next step is to connect the refrigerant lines. The refrigerant lines are located at the back of the air conditioner. They will need to be connected to the refrigerant lines that are coming out of the wall. To connect the lines, simply screw them together until they are hand-tight. Then, use a wrench to tighten them further.

5. Connect the electrical lines

The next step is to connect the electrical lines. The electrical lines are located inside the air conditioner. They will need to be connected to the electrical lines that are coming out of the wall. To connect the lines, simply strip the ends of the wires and twist them together. Then, secure the connections with wire nuts.

6. Turn on the power

Once the refrigerant lines and electrical lines are connected, you can turn on the power. To do this, simply flip the breaker or switch that controls the air conditioner. Once the power is on, the air conditioner will start to cool your home or office space.

7. Test the air conditioner

Once the air conditioner is turned on, you should test it to make sure that it is working properly. To do this, simply set the thermostat to a cool temperature and wait for the air conditioner to cool the room. If the air conditioner is working properly, the room should cool down within a few minutes.