How To Mount A Cabinet To The Wall

Mounting a cabinet to the wall is a relatively simple task that can be completed in a few hours. By following these steps, you can ensure that your cabinet is securely mounted and will not fall off the wall.

Tools and Materials You'll Need

Cabinet
Screws or nails
Drill or hammer
Stud finder
Level
Pencil or chalk
Safety glasses

Instructions

Find the studs. Using a stud finder, locate the studs in the wall where you want to mount the cabinet. Studs are the vertical supports that run behind the drywall.
Mark the stud locations. Once you have found the studs, mark their locations on the wall with a pencil or chalk.
Drill pilot holes. Drill pilot holes into the studs at the marked locations. The pilot holes should be slightly smaller than the screws or nails that you will be using to mount the cabinet.
Attach the cabinet to the wall. Lift the cabinet into place and align it with the pilot holes. Drive screws or nails through the pilot holes and into the studs. Make sure that the cabinet is securely attached to the wall.
Level the cabinet. Use a level to check if the cabinet is level. If it is not level, adjust the screws or nails until it is.

Tips

If you are mounting a heavy cabinet, it is best to use screws instead of nails.
If you are not sure how to find the studs in the wall, you can use a stud finder.
Always wear safety glasses when drilling or hammering.
If you are unsure about how to mount a cabinet, it is best to consult with a professional.