How To Mount Power Strip On Wall

Power strips are a convenient way to add extra outlets to any room in your home. However, they can also be a hazard if they’re not properly mounted on the wall. A power strip can fall off the wall if it’s not securely attached, which can then create a fire hazard.

That’s why it’s important to know how to properly mount a power strip on the wall. Here’s a step-by-step guide on how to do it:

Step 1: Gather your materials.

You will need the following materials:

A power strip
Screws
A screwdriver
A drill (optional)

Step 2: Choose a location for the power strip.

The first step is to choose a suitable location for the power strip. It’s important to choose a location that is out of the way of foot traffic and pets. You should also choose a location that is close to the outlets that you need to use.

Step 3: Mark the location of the screw holes.

Once you have chosen a location for the power strip, you need to mark the location of the screw holes. The screw holes are usually located on the back of the power strip. Use a pencil to mark the location of the screw holes.

Step 4: Drill the pilot holes (optional).

If you are mounting the power strip on a hard surface, such as concrete or brick, you will need to drill pilot holes before you can insert the screws. Use a drill bit that is slightly smaller than the diameter of the screws.

Step 5: Insert the screws.

Insert the screws into the pilot holes or directly into the wall, depending on the surface. Be sure to tighten the screws securely.

Step 6: Hang the power strip on the screws.

Once the screws are in place, you can hang the power strip on the screws. The power strip should fit snugly against the wall.

Step 7: Plug in your devices.

Once the power strip is mounted on the wall, you can plug in your devices. Be sure to be careful not to overload the power strip, as this could create a fire hazard.

Additional tips:

If you are mounting a power strip on a painted wall, you may want to use drywall anchors to prevent the screws from pulling out of the wall.
You can use a level to ensure that the power strip is mounted straight.
If you are mounting a power strip on a surface that is not suitable for drilling, such as glass or tile, you can use adhesive strips to attach the power strip to the surface.

By following these steps, you can safely mount a power strip on your wall and provide additional outlets for your devices.