How To Mount Wall Cabinet

Installing wall cabinets can add extra storage space and enhance the aesthetics of your kitchen or bathroom. Here's a step-by-step guide to help you mount wall cabinets with confidence.

### Step 1: Gather Materials

Before you start, you'll need the following materials:

- Wall cabinets - Stud finder - Level - Measuring tape - Pencil or marker - Drill or impact driver - Screws - Screws for mounting the cabinet to the wall - Safety glasses ### Step 2: Determine Cabinet Height

Use a measuring tape to determine the desired height for the cabinets. Mark this height on the wall using a pencil or marker.

### Step 3: Locate Studs

Use a stud finder to locate the wall studs. Mark the studs on the wall.

### Step 4: Install Cleats

Cut cleats to the length of the cabinets. A cleat is a small piece of wood that attaches to the wall and provides support for the cabinet. Attach the cleats to the wall, ensuring they are level and parallel to the marked height line. Use screws to secure the cleats to the studs.

### Step 5: Mount Cabinets on Cleats

Lift the cabinets onto the cleats. Use a level to ensure they are straight and adjust the screws as needed to secure the cabinets to the cleats.

### Step 6: Secure Cabinets to Wall

Drill pilot holes into the cabinets through the holes in the cleats. Drive screws into the pilot holes to fasten the cabinets securely to the wall.

### Step 7: Install Filler Strips

If there is any visible space between adjacent cabinets or between the cabinets and the walls, cover the gaps with filler strips. Secure the filler strips using appropriate fasteners.

### Step 8: Level and Adjust

Use a level to check the cabinets for levelness. Make any necessary adjustments to ensure they are aligned properly.

### Tips: - Use a laser level to ensure the cleats are perfectly level and aligned. - Drive screws at an angle to increase holding strength. - If your walls are uneven or not plumb, use shims to level the cleats and cabinets. - For heavier cabinets, consider using toggle bolts for additional support. - Always wear safety glasses while drilling or using power tools.